Catalogue of Industries for Guiding Foreign Investment (Revision 2017)

No. 4 Decree of the National Development and Reform Commission and the Ministry of Commerce of the People's Republic of China

The Catalogue of Industries for Guiding Foreign Investment (Revision 2017),  which has been approved by the Party Central Committee and the State  Council, is hereby issued and shall come into force on July 28, 2017;  while the Catalogue of Industries for Guiding Foreign Investment (Revision 2015)  issued by the National Development and Reform Commission and the  Ministry of Commerce on March 10, 2015 shall be repealed simultaneously.

Director of the National Development and Reform Commission: He Lifeng

Minister of Commerce: Zhong Shan

June 28, 2017

Catalogue of Industries for Guiding Foreign Investment

 (Revision 2017)

Catalogue of Encouraged Industries for Foreign Investment

I. Agriculture, Forestry, Animal Husbandry and Fishery

1.    Planting,  development and production of woody plants that contain edible oil or  are used as seasonings or industrial raw materials

2.    Development  of planting technologies for green food vegetables or organic  vegetables (including edible fungi and melons), dried and fresh fruit,  and tea, and relevant production

3.    Development of new planting technologies for crops, such as sugar crops, fruit trees and pasture, and relevant production

4.    Production of flowers and construction and operation of nurseries

5.    Planting of rubber trees, oil palm, sisal and coffee

6.    Planting or breeding of Chinese medicinal materials

7.    Returning  crop straw to farmland and the comprehensive utilization of crop straw;  development and production of organic fertilizer resources

8.    Breeding of aquatic fingerlings (excluding China’s rare and endemic species)

9.    Construction  and operation of environment protection projects, such as the planting  of trees and grass to combat desertification and soil erosion

10.  Aqua farming, open sea-cage aquaculture, industrial aquaculture, and ecological mariculture

II. Mining Industry

11.  Exploration and exploitation of oil and natural gas as well as utilization of mine gas

12.  Improvement  in enhanced oil recovery (in the form of engineering services) as well  as development and application of related new technologies

13.  Development  and application of new technologies for oil exploration and  exploitation in areas such as geophysical prospecting, drilling, well  logging, mud logging, and down-hole operation

14.  Development  and application of new technologies for enhancing utilization rate of  mine tailings and the comprehensive application of ecological  restoration technology in mining areas

15.  Exploration and exploitation of mines in short supply in China (such as mines of sylvite and chromite) and mineral separation

III. Manufacturing Industries

(I) Agricultural and Sideline Food Processing

16.  Development and production of safe, efficient and environment-friendly fodder and additives (containing methionine)

17.  Aquatic product processing, shellfish purification and processing, and development of algal health food

18.  Processing of vegetables, dried and fresh fruit, and livestock and poultry products

(II) Food Manufacturing

19.  Development and production of infant formula food, food for special medical purpose and health food

20.  Processing of forest agricultural products

21.  Development of new technologies for and production of natural food additives and natural perfume

(III) Manufacturing of Wine, Beverage and Refined Tea

22.  Development and production of fruit and vegetable drinks, protein drinks, tea drinks, coffee drinks, and botanical drinks

(IV) Textile Industry

23.  Production  of multifunctional industrial textiles that are lightweight,  high/low-temperature resistant and chemical-resistant, with high  performance and good light fastness, using non-woven, weaving, knitting  or their composite techniques

24.  Dyeing  and after finishing processing of high-end textiles, using advanced  energy conservation and emission reduction technologies and equipment

25.  Processing  of special natural fibers (including but not limited to cashmere and  other special animal fibers, bamboo fiber and bastose, silk, and colored  cotton) that satisfy the ecological, comprehensive resource utilization  and environmental protection requirements

(V) Textile, Clothing and Apparel Sectors

26. Production of clothing by using computer integrated manufacturing system (CIMS)

27. Production of special-purpose functional clothing

(VI) Leathers, Furs, Feathers and Related Products and Shoemaking

28.  Cleaning and processing of leathers and furs

29.  Finishing of leather with new techniques

30.  Multipurpose use of leather wastes

(VII) Wood Processing and Wood, Bamboo, Rattan, Palm Fiber and Straw Products

31.  Development  of new technologies for the comprehensive utilization of three forest  residues (logging residue, bucking residue and processing residue),  “inferior quality lumbers, small-sized lumbers and firewood,” and  bamboo, and the development and production of relevant new products

(VIII) Manufacturing of Supplies for Culture and Education, Industrial Arts, Sports and Entertainment

32.  Production of high-end carpet, embroidery and drawnwork

(IX) Petroleum Processing, Coking and Nuclear Fuel Processing

33.  Processing of carbolic oil and absorber oil, high-end utilization of coal tar pitch (excluding modified pitch)

(X) Manufacturing of Chemical Raw Materials and Chemical Products

34.  Development and production of new downstream products of polyvinyl chloride (PAC) and organosilicon

35.  Auxiliary  raw materials for the production of synthetic materials: production of  hydrogen peroxide-based propylene oxide, naphthalene dicarboxylate  (NDC), 1, 4-cyclohexanedimethanol (CHDM), butadiene adiponitrile and  hexanediamine, with an annual production capacity of 50,000 tons or more  

36.  Raw materials for the production of synthetic fibers: production of nylon 66 salt and 1, 3-propylene glycol

37.  Synthetic  rubber: production of polyurethane rubber, acrylate rubber,  epichlorohydrin rubber, fluorine rubber, silicone rubber and other  special rubbers

38.  Engineering  plastics and plastic alloys: production of non-phosgene polycarbonate  (PC), homopolymerizepolyoxymethylene (POM), polyphenylene sulfide,  polyther-ether-ketone (PEEK), polyimide, polysulfone, polyether sulfone,  polyarylate (PAR), polyphenylene sulfide and its modified materials as  well as liquid crystal polymer, etc., with an annual production capacity  of 60,000 tons or more

39.  Fine  chemicals: new catalyst products and technologies, processing  technologies for the commercialization of dyes (pigments), production of  electronic chemicals and papermaking chemicals, leather chemicals  (excluding N-N-dimethylformamide), oilfield chemicals, surfactants,  water treatment chemicals, adhesives, inorganic fibers and  nano-materials, and deep processing of pigment encapsulation

40.  Production  of water-based ink, low-volatile ink for electron beam curing and  UV-curing, and environment-friendly organic solvents

41.  Production of natural spices, synthetic spices and single ion spices

42.  Production  of high-performance coatings, high solid, solventless coatings,  water-based industrial coatings, and auxiliary water-based resins

43.  Production  of high-performance fluorine and fluorine coating materials, medical  intermediates containing fluorine, and environment-friendly  fluorine-containing refrigerant, detergent and vesicant

44.  Recovery of fluoride resources from the phosphorus chemical industry and aluminum smelting

45.  Development of new technologies for forestry chemical products and development and production of relevant new products

46.  Development and production of inorganic, organic and biological membranes for environmental protection purposes

47.  Development  and production of new types of fertilizers: high potassium fertilizers,  compound microbial inoculants, compound microbial fertilizers,  decomposition agents for straws and refuse, and other microbial  formulations with special functions

48.  Development  and production of new varieties, new formulations, special-purpose  intermediates, or auxiliary agents of high efficient, safe and  environment-friendly agricultural chemicals, and development and  application of relevant clean production process (process of  ethylene-based acetochlor, aqueous phase chlorpyrifos, process of  recovery of methyl chloride with glyphosate, production of chiral and  stereospecific pesticides by oriented synthesis, and synthetic technique  of diethyl thiophosphoryl chloride)

49.  Development  and production of biological agricultural chemicals and biological  control products: microbial pesticides, microbial fungicides,  agricultural antibiotics, inset pheromones, natural enemies, and  microbial herbicides

50.  Comprehensive utilization, treatment and disposal of waste gas, liquid waste and waste residue

51.  Production  of organic polymer materials: aircraft skin coating, rare earth cerium  sulphide red dyes, lead-free electronic packaging materials,  lithographic slurry specifically for color plasma screens, microfibers  with a small diameter and a large specific surface area, high-precision  fuel filter paper, lithium-ion battery diaphragms, surface treatment  self-healing materials and super-hydrophobic nano-coating materials

(XI) Pharmaceutical Industry

52.  Production of new compound drugs or drugs with active ingredients (including drug substance and formulations)

53.  Amino acids: production of tryptophan, histidine, methionie, etc. using the zymotechnics process

54.  Development  and production of new types of anticarcinogenic drugs, cardiovascular  and cerebrovascular drugs, and nervous system drugs

55.  Production of new types of drugs employing bioengineering and biotechnology

56.  Production of HIV/ADIS vaccines, hepatitis C vaccines,  contraceptive vaccines, and new types of vaccines for cervical carcinoma, malaria, “hand, foot and mouth” diseases, etc.

57.  Development and production of marine drugs

58.  Pharmaceutical  formulations: production of new formulations and new products employing  new technologies, such as slow release, controlled release, targeting,  and percutaneous absorption

59.  Development and production of new excipients

60.  Production of special antibacterial drug substance for animals (including antibiotics and chemical synthesis API)

61.  Production  of new products and new formulations of antibacterial drugs,  anthelmintics, insecticides and anti-coccidiosis drugs for veterinary  use

62.  Development and production of new types of diagnostic reagents

(XII) Chemical Fiber Manufacturing

63.  Production  of high-tech chemical fibers (excluding viscose fibers), including but  not limited to differential chemical fibers, aramid fibers, carbon  fibers, high-performance/high modulus polyethylene fibers, and  polyphenylene sulfide (PPS) fibers

64.  Production  of new types of polyester for fiber or non-fiber use: polytrimethylene  terephthalate (PTT), polyethylene naphthalate (PEN),  polycyclohexylenedimethylene terephthalate (PCT), and glycol-modified  polyethylene terephthalate (PETG)

65.  Production  of biomass fibers by utilizing new types of renewable resources and  environment-friendly process, including but not limited to new solvent  spun cellulose fibers (Lyocell), regenerated cellulose fibers using  bamboo, hemp, etc., poly lactic acide (PLA) fibers, chitin fiber,  polyhydroxyalkanoates (PHA), and animal and plant protein fibers

66.  Development  and production of nylon 11, nylon 12, nylon 1414, nylon 46, long carbon  chain nylon, high temperature resistant nylon and other new types of  polyamide

67.  Production of aramid fibers and cords for radial tires

(XIII) Rubber and Plastic Products

68.  Development and production of new photo-ecological, multifunctional and wide-width agricultural films

69.  Recycle and reutilization of plastic waste

70.  Development  of new soft plastic packaging technologies and production of new  varieties of soft plastic packaging products (including high-barrier and  multifunctional films and relevant raw materials)

(XIV) Nonmetallic Mineral Products

71.  Development  and production of building materials featuring energy conservation,  environmental protection, waste recycling, light-weight, high-strength,  high performance and multiple functions

72.  Production of energy-saving and high-efficiency chemical building materials using plastic to replace steel or wood

73.  Production  of SBS/APP modified bitumen waterproof rolls with an annual output of  10 million square meters or more; wide (two meters or more) ethylene  propylene diene monomer (EPDM) rubber waterproof rolls and relevant  auxiliary materials; wide (two meters or more) polyvinyl chloride (PVC)  waterproof rolls; and thermoplastic polyolefin (TPO) waterproof rolls

74.  Development  and production of functional glass using new technologies:  electromagnetic wave shielding glass, glass substrate for  microelectronic use, infrared transmitting lead-free glass,  electronic-grade large-scale quartz glass products (such as pipe, plate,  copple, instruments, and utensils), multifunctional windshield with  excellent optical performance, extreme materials and products for use in  information technologies (including     quartz  glass bushing and ceramic wafer for waveguide-grade, high-precision  optical fiber perform rod); purification processing of raw materials for  high pure (≥99.998%) or ultrapure (≥99.999%) crystal

75.  Production of conductive glass for thin film batteries, glass for solar illuminator and conductive glass used in construction

76.  Production  of glass fiber products and special glass fibers: low dielectric glass  fibers, quartz glass fibers, high silica glass fibers, high-strength and  high elastic glass fibers, ceramic fibers, etc. and other products

77.  Production  of optical fibers and their products: optical fiber bundles for image  transmission and laser optical fibers for medical treatment, super  second-generation and third-generation microchannel plates, optical  fiber panels, image inverters, and glass fiber cones

78.  Standard refinement of ceramics raw materials and production of high-grade decorative materials used in ceramics

79.  Production  of environment-friendly (non-chromizing) refractory materials used in  furnaces, including but not limited to cement, electronic glass,  ceramics, and microporous carbon bricks

80.  Production of porous ceramics

81.  Production  of new inorganic and nonmetallic materials and products: composite  materials, special ceramics, special sealing materials (including  high-speed oil-seal materials), special friction materials (including  high-speed friction brake products), special binding materials, special  latex materials, underwater acoustic rubber products, and nano materials  

82.  Production of organic-inorganic composite cellular insulation materials

83.  Production  of high-tech composite materials: continuous fiber reinforced  thermoplastic composite materials and prepregs, auxiliary materials for  molding of resin-based composite materials with thermal resistance of  more than 300°C,  resin-based composite material (including sports products and  lightweight high-strength parts of vehicle), special-function composite  materials and their products (including composite products used in deep  water or for diving, and composite products for medical treatment and  recuperation), carbon or carbon composite materials, high-performance  ceramic-based composite materials and their products, metal or  glass-based composite materials and their products, metal-layered  composite materials and their products, ultra high pressure composite  rubber hoses (pressure ≥ 320 MPa), and larger passenger aircraft tires

84.  Production  of raw materials for precision and high-performance ceramics:  ultra-fine silicone carbide (SiC) powder (purity > 99%, average  particle size < 1 μm), ultra-fine silicon nitride powder (Si3N4)  (purity > 99%, average particle size < 1 μm), high-purity  ultra-fine alumina powder (purity > 99.9%, average particle size <  0.5 μm), low-temperature sintered zirconia (ZrO2)  powder (sintering temperature < 1,350°C), high-purity aluminum  nitride (AlN) powder (purity > 99%, average particle size <1 μm),  rutile titanium diode TiO2 powder (purity  > 98.5%), white carbon black (particle size < 100 nm), and barium  titanate (purity > 99%, particle size < 1 μm)

85.  Development  and production of high-quality artificial crystals and thin film  transistor products: high-quality artificially synthesized crystal  (piezoelectric crystal and ultraviolet ray transmitting crystal),  super-hard crystal (cubic boron nitride crystal), high-temperature  resistant and highly-insulated artificially synthesized crystal  (artificially synthesized mica), new electro-optical crystal, high-power  laser crystal and large-scale scintillation crystal, diamond-film tool,  ultrathin synthetic diamond saw blade with a thickness of not more than  0.3 mm

86.  Fine processing of nonmetallic minerals (ultra-fine grinding, high purifying, refining, and modified performance)

87.  Production of ultra-high-power graphite electrodes

88.  Production of pearl mica (particle size of 3-150 μm)

89.  Production of multi-dimensional and multi-directional integral fabrics and shape fabrics

90.  Safe disposal of solid wastes using new dry process cement kilns

91.  Recycling of building waste

92.  Comprehensive utilization of industrial by-product gypsum and other industrial wastes

93.  Development  and application of new technologies for the comprehensive utilization  of nonmetal mine tailings; ecological restoration of mines

(XV) Nonferrous Metal Smelting and Rolling Industries

94.  Production of silicon single crystals and polished wafers with a diameter of 200 mm or more

95.  Production  of high-tech nonferrous materials: compound semiconductor materials  (gallium arsenide, gallium phosphide, indium phosphide, and gallium  nitride), high-temperature superconducting materials, memory alloy  materials (titanium nickel and copper and iron-based memory alloy  materials), ultra-fine (nano) calcium carbide and ultra-fine (nano)  crystal hard alloy, ultra-hard composite materials, precious metal  composite materials, light metal composite materials and combination of  dissimilar materials, aluminum foils for radiators, medium and  high-voltage cathode capacitor aluminum foils, special large aluminum  alloy sections, aluminum alloy precision forging dies, overhead  conductors for electrified railway lines, ultra-thin copper strips,  copper alloy materials for corrosion-resistant heat exchangers,  high-performance copper-nickel and copper-iron alloy strips, materials  for processing beryllium copper strips, lines, pipes and rods,  high-temperature resistant and anti-senescence tungsten filaments,  magnesium alloy castings, lead-free solder, magnesium alloys and their  products, foamed aluminum, smelting and processing of titanium alloy,  sponge zirconium at atomic energy level, and deeply processed tungsten  and molybdenum products

(XVI) Metal Products

96.  Research,  development and manufacturing of new types of light-weight and  environment-friendly materials for aviation, aerospace, automobiles and  motorcycles (including but not limited to special-purpose aluminum  sheets, aluminum-magnesium alloy materials, and aluminum alloy  motorcycle frames)

97.  Research, development and manufacturing of light metal semisolid rapid formation materials

98.  Manufacturing  and processing (including painting and processing inner and outer  surface of products) of metal packing products (complete products, wall  thickness < 0.3 mm) used for packing various kinds of grain, oil, food, vegetables, fruits, beverages and household chemicals

99.  Manufacturing of nickel-saving stainless steel products

(XVII) General Equipment Manufacturing

100.       Manufacturing  of high-end computerized numerical controlled (CNC) machine tools and  key spare parts: five-axis alignment CNC machine tools, CNC coordinate  boring and milling processing center, CNC coordinate grinding machines

101.       Manufacturing of multi-station forging forming machines of 1,000 tons or above

102.       Manufacturing of equipment for dismantling, crushing and postprocessing and sorting of retired automobiles

103.       Manufacturing of flexible transfer lines (FTL)

104.       Manufacturing of vertical multi-joint industrial robots, and welding robots and relevant welding devices and equipment

105.       Manufacturing of sub-micron and ultra-fine grinders

106.       Manufacturing of wheeled or crawler cranes of 400 tons or above

107.       Design  and manufacturing of high-pressure plunger pumps and engines with  working pressure ≥ 35 MPa and low-speed large-torque engines with  working pressure ≥ 35 MPa

108.       Manufacturing  of integrated hydraulic-pressure multiple unit valve with working  pressure of ≥ 25 MPa and electro-hydraulic proportional servo elements

109.       Design  and manufacturing of valve terminal, pneumatic solenoid valve of less  than 0.35 W and high-frequency electrically-controlled gas valves of 200  Hz or more

110.       Design and manufacturing of hydrostatic drive devices

111.       Development  and manufacturing of non-contact gas film seals with pressure > 10  MPa and dry gas seals with pressure > 10 MPa (including experimental  devices)

112.       Development  and manufacturing of equipment for automobile polymer materials  (friction plates, remodeled phenolic pistons, nonmetallic hydraulic  master/sub-pumps, etc.)

113.  Manufacturing of the third and more generation car wheel hub bearings,  bearings for high or medium-grade CNC machine tools or processing  centers, high-speed wire rod or plate rolling mill bearings, high-speed  railway bearings, low-noise bearings with vibration below Z4, P4 or P2  level bearings of various bearings, bearings of wind turbine generator  set, and aircraft bearings

114.       Manufacturing  of high-density, high-precision and complex-shaped powder metallurgical  parts and chains used for automobile, engineering machinery, etc.

115.       Manufacturing  of gear transmission used for wind power or high speed rail, gear  transmission agent with adjustable blades used for vessels, and  large-sized and heavy-load gear boxes

116.       Manufacturing of high-temperature resistant insulation materials (F and H insulation classes) and insulation molding products

117.       Development and manufacturing of accumulator bladders, and rubber and plastic seals for hydropneumatic use

118.       Manufacturing of high-precision, high-strength (level 12.9 or above), special-shaped and assembly fasteners

119.       Manufacturing of miniature precision transmission junction pieces (clutches)

120.       Manufacturing of coupling shaft for heavy rolling mills

121.       Remanufacturing  of machinery such as machine tools, engineering machinery and railroad  engine equipment, and remanufacturing of automobile parts and key  components for medical imaging equipment, and remanufacturing of office  facilities such as duplicators

122.       Development  and manufacturing of digital cameras with pixel of 10 million or more  or horizontal field of 120° or above, and other optical lenses and  optical-electric modules

123.       Manufacturing  of office machinery (including those for industrial use):  multi-function integrated office equipment (copy, print, fax and  scanning), printing equipment, high resolution printing head with  precision 2,400 dpi and more, and photosensitive drum

124.       Manufacturing of film machines: 2K and 4K digital film projector, digital film camera, digital imaging and editing equipment

(XVIII) Special-Purpose Equipment Manufacturing

125.       Manufacturing  of trackless equipment for excavation, loading and transport in mines:  including but not limited to mechanically-driven tippers for mining with  a capacity of 200 tons or more, mobile crushers, bucket excavators with  a capacity of 5,000 cubic meters or more per hour, loaders for mining  with a capacity of 8 cubic meters or more, and electrically-dragged coal  mining machines of 2,500 kilowatt or more

126.       Manufacturing  of equipment for geophysical exploration (excluding gravity or magnetic  measurement) and well logging: MEME seismometers, digital telemetric  seismographs, digital imaging systems and digitally controlled well  logging systems, devices and apparatus for horizontal wells, directional  wells and drilling rigs, and measurement-while-drilling (MWD) tools

127.       Manufacturing  of equipment for oil exploration, drilling, collection and  transportation: floating drilling systems and floating production  systems with an operating water depth of more than 1,500 meters and the  supporting subsea oil extraction, collection and transportation  equipment

128.       Manufacturing  of large-caliber rotary drilling rigs with a caliber of 2 meters or  more and depth of 30 meters or more, push benches with a diameter of 1.2  meters or more, complete sets of large equipment with a pull-back force  of 300 tons ore more for laying underground pipes and lines without  digging, and underground diaphragm wall construction drilling rigs

129.       Design and manufacturing of large bulldozers of 520 horsepower or more

130.       Design  and manufacturing of silt removers with a capacity of 100 cubic meters  or more per hour and dredging devices for dredgers with a capacity of  1,000 tons or more

131.       Design and manufacturing of equipment for the construction of concrete cut-off walls used for flood prevention dikes

132.       Manufacturing  of underwater earthwork construction machinery: bulldozers, loaders,  excavators, etc. operating nine meters underwater or deeper

133.       Manufacturing of equipment for maintenance and automatic testing of highways and bridges

134.       Manufacturing of equipment for operational monitoring, ventilation, disaster prevention and rescue systems of highway tunnels

135.       Design  and manufacturing of maintenance machinery and inspection and  monitoring equipment for large-scale railway construction, railway  tracks, bridges and tunnels, and their key parts and components

136.       Manufacturing  of equipment for (asphaltic) linoleum tiles and equipment for producing  galvanized steel sheets and other metal roofs

137.       Manufacturing  of equipment for environment-friendly and energy-saving on-site  polyurethane spraying waterproof and thermal insulation systems;  technology of preparing polyurethane sealants and manufacturing of  relevant equipment, and technology of preparing improved silicone  sealants and manufacturing of relevant production equipment

138.       Design and manufacturing of high-precision strip mills (thickness precision of 10 microns)

139.       Manufacturing of ore dressing equipment for multi-element, fine-particle and refractory metal minerals

140.       Manufacturing  of the key equipment of complete sets of ethylene equipment with an  annual capacity of 1 million tons or more: mixing granulators with an  annual processing capacity of 400,000 tons or more, helical-conveyor  centrifuges with a diameter of 1,000 mm or more,  low-flow high-head centrifugal pump

141.       Design  and manufacturing of metal product molds (extrusion dies for pipes,  rods and section bars made of copper, aluminum, titanium and zirconium)

142.       Design  and manufacturing of punching dies for automobile body covers,  large-sized injection molds for automobile dashboard, bumper, etc., and  clamps and gauges for automobiles and motorcycles

143.       Design and manufacturing of production equipment for power batteries for automobiles

144.       Design and manufacturing of precise die molds (punching dies with a precision higher than 0.02 mm and cavity molds with a precision higher than 0.05 mm)

145.       Design and manufacturing of nonmetal product molds

146.       Manufacturing  of beer bottling equipment with a capacity of 60,000 bottles or more  per hour, hot and medium-temperature beverage bottling equipment with a  capacity of 50,000 bottles or more per hour, and aseptic filling  equipment with a capacity of 36,000 bottles or more per hour

147.       Production technologies of amino acids, enzyme preparations, food additives, etc. and the manufacturing of key equipment

148.       Manufacturing  of complete sets of equipment for animal feed processing with a  capacity of 10 tons or more per hour and the key parts of such equipment

149.       Manufacturing of equipment for lightweight corrugated boards and cartons with corrugation height of 0.75 mm or less

150.       Manufacturing of sheet-fed and multi-color offset presses (width ≥ 750 mm;  printing speed: single side and multiple colors ≥ 16,000 sheets per  hour, and double sides and multiple colors ≥ 13,000 sheets per hour)

151.  Manufacturing of single-width single-paper path web-fed lithographic  printing presses with a printing speed of more than 75,000 bisect sheets  per hour (787×880 mm),  double-width single-paper path web-fed lithographic printing presses  with a printing speed of more than 170,000 bisect sheets per hour (787×880 mm), and commercial web-fed lithographic printing presses with a printing speed of more than 50,000 bisect sheets per hour (787×880 mm)

152.       Manufacturing  of multi-color wide flexographic presses (printing width ≥ 1,300 mm and  printing speed ≥ 350 meters per minute), inkjet digital printing  presses (used for publication; printing speed ≥ 150 meters per minute  and resolution ≥ 600 dpi; used for packaging: printing speed ≥ 30 meters  per minute and resolution ≥ 1,000 dpi; used for variable data: printing  speed ≥ 100 meters per minute and resolution ≥ 300 dpi)

153.       Manufacturing  of systems for ink color computer pre-setting, remote ink color  control, water-ink speed tracking, automatic printing quality inspection  and tracking, and shaftless driving technology;  manufacturing  of high-speed automatic pasters and feeders with a speed of 75,000  sheets per hour, remotely adjustable high-speed folding machines,  automatic overprinting systems, cooling devices, silicon-adding systems,  and deviation adjustment devices

154.       Manufacturing of electronic-gun automatic coating machines

155.       Deep processing technology for sheet glass and manufacturing of relevant equipment

156.       Manufacturing of complete sets of equipment such as new types of paper (including pulp) making machines

157.       Manufacturing of equipment using new leather post ornament and processing technology

158.       Development  and manufacturing of new agricultural product processing and storage  equipment: new equipment for the processing, storage, preservation,  grading, packaging, and drying of grains, oil plants, vegetables, dried  and fresh fruit products, meat products, aquatic products, and other  products; agricultural product quality inspection instruments and  equipment; damage-free quality inspection instruments and equipment for  agricultural products; rheometers, farinographs, ultramicro crushing  equipment, high-efficiency dewatering equipment, high-efficiency fruit  juice condensation equipment achieving five or more effects,  sterilization equipment for powder food materials, solid and semisolid  food aseptically packaging equipment, and disk-type centrifugal  separators

159.       Manufacturing  of agricultural machinery: agricultural equipment (automatic irrigation  equipment for greenhosues, equipment for automatic disposition of  nutrient solutions and fertilization, high-efficiency vegetable seedling  equipment, and soil nutrient analysis equipment), tractors with an  engine power of 200 kilowatts or more and the auxiliary farm implements,  diesel engines with low fuel consumption, low noise and low emission,  sprayers auxiliary to large tractors and equipped with residual droplets  retrieval devices, high-performance rice transplanters, cotton picking  machines and cotton picking platforms, self-propelled (hydraulically or  mechanically-driven) corn combine harvesters adaptable to various row  spacings, peanut harvesters, rapeseed harvesters, cane harvesters, and  beet harvesters

160.       Manufacturing of forestry machinery and instruments using new technology

161.       Manufacturing of equipment for the collection, bundling and comprehensive utilization of crop straws

162.       Manufacturing  of equipment for the resource utilization of agricultural waste and  waste from livestock and poultry breeding meeting a certain scale

163.       Manufacturing of agricultural equipment using fertilizer-saving, pesticide-saving or water-saving technology

164.       Manufacturing of equipment for cleaning electromechanical wells and equipment for producing cleaning agents

165.       Manufacturing of electronic endoscopes

166.       Manufacturing of fundus cameras

167.       Manufacturing  of key components of medical imaging equipment (including but not  limited to high-field-strength superconducting magnetic resonance  imaging equipment, X-ray computed tomography imaging equipment, and  digital color diagnostic ultrasound equipment)

168.       Manufacturing of (3D) ultrasonic transducers for medical use

169.       Manufacturing of equipment for boron neutron capture therapy (BNCT)

170.       Manufacturing of image-guided intensity modulated radiation therapy systems

171.       Manufacturing of haemodialysis machines and hemofiltration machines

172.       Manufacturing  of equipment for full-automatic biochemistry monitoring,  five-classified blood cell analyzers, full-automatic chemiluminescence  immunity analyzers, and high throughput gene sequencing system

173. New technology for drug quality control and manufacturing of new equipment for drug quality control

174.       Development  of new analysis technology and new extracting process for active  substance in natural drugs; development and manufacturing of new  extracting equipment

175.       Manufacturing of multi-layer co-extrusion water-cooled blown film equipment for non-PVC medical infusion bags

176.       Development  and manufacturing of new textile machinery, key parts and components,  and textile testing and experimental apparatus

177.       Manufacturing of computer-aided jacquard artificial fur machines

178.       Manufacturing of equipment specially for producing solar cells

179.       Manufacturing  of air pollution prevention and control equipment: high  temperature-resistant and corrosion-resistant filtering materials,  low-NOx combustion devices, catalyst for flue gas denitrogenation and  complete sets of denitrogenation equipment, flue gas desulfurization  equipment, flue gas dedusting equipment, industrial organic exhaust  purification equipment, diesel vehicle exhaust purification equipment,  and heavy metal exhaust air treatment equipment

180.       Manufacturing  of water pollution prevention and control equipment: horizontal spiral  centrifugal dehydrators, membrane and membrane materials, ozone  generators with a capacity of more than 50 kg/h, chlorine dioxide generators with a capacity of more than 10 kg/h,  ultraviolet disinfection devices, small domestic sewage treatment  equipment used in rural areas, and heavy metal wastewater treatment  equipment

181.       Manufacturing  of solid waste treatment and disposal equipment: sewage plant sludge  disposal and resource recycling equipment, complete sets of refuse  incineration equipment with a daily treatment capacity of 500 tons or  more, landfill leachate treatment technology equipment, anti-seepage  geo-membranes in landfills, building waste treatment and resource  recovery utilization equipment, devices for disposal of hazardous waste,  devices for power generation with biogas in landfills, treatment  equipment for ferrous wastes, and soil remediation equipment

182.       Development and manufacturing of equipment for the comprehensive utilization of red mud from aluminum industry

183.       Manufacturing of equipment for the comprehensive utilization of mine tailings

184.       Manufacturing  of equipment for the collection, treatment and recycling of used and  waste plastics, electrical appliances, rubbers and batteries

185.       Manufacturing of reclamation equipment for used and waste textiles

186.       Manufacturing of equipment for the remanufacturing of used and waste mechanical and electrical products

187.       Manufacturing of devices for the comprehensive utilization of used and waste tires

188.       Environmental protection technology for aquatic ecosystems and the manufacturing of relevant equipment

189.       Manufacturing of portable assembling water purification equipment

190.       Unconventional water treatment or recycling equipment and water quality monitoring instruments

191.       Leak test equipment and instruments for industrial water pipeline networks and equipment (appliances)

192.       Development  of technologies for seawater desalination and circulating cooling with a  daily capacity of 100,000 cubic meters or more and manufacturing of  relevant complete sets of equipment

193.       Manufacturing of special meteorological observation and analysis equipment

194.       Technology  system development for seismic stations, networks and mobile  seismologic observation and manufacturing of relevant apparatus and  equipment

195.       Manufacturing of radial tire building machine with four or more drums

196.       Manufacturing of rolling resistance testers and establishment of tire noise laboratories

197.       Manufacturing of equipment using new technology for heat supply metering and temperature control devices

198.       Manufacturing of equipment for hydrogen energy preparation, storage and transportation and inspection systems

199.       Manufacturing  of new heavy residual oil gasification and atomizing nozzles,  high-efficiency steam trap valve with a leakage rate of 0.5%or below,  and high-temperature ceramic heat exchanger with temperature of 1,000°C  or above

200.       Manufacturing of devices for recovery of marine oil spilling

201.       Manufacturing of equipment for utilization of low concentration coalmine gas and ventilation air methane

202.       Development  and utilization of clean coal technologies and products as well as  manufacturing of relevant equipment (coal gasification and liquefaction,  coal water slurry and industry shape-coal)

203.       Development  of technologies for fire prevention and control and rescue to be used  in large-scale public buildings, high-rise buildings, petrochemical  facilities, forest, mountains or water areas and underground facilities,  and manufacturing of relevant equipment

204.       Manufacturing of intelligent emergency medical rescue equipment

205.       Manufacturing of hydrologic monitoring sensors

(XIX) Automobile Manufacturing

206.       Manufacturing  of automobile engines and establishment of engine research and  development institutions: gasoline engines with power of not less than  70 kilowatts per liter, diesel engines with power of not less than 50  kilowatts per liter and displacement of less than 3 liters,  diesel engines with power of not less than 40 kilowatts per liter and  displacement of more than 3 liters, and engines using new energy  resources such as fuel cells and mixed fuels

207.       Manufacturing  of key automobile parts and components and research and development of  key technologies: dual-clutch transmission (DCT), continuously variable  transmission (CVT), automated mechanical transmission (AMT), gasoline  engine turbocharger, viscous coupling (for four-wheel drive), actuator  for automatic transmission (electromagnetic valve), hydraulic retarder,  eddy current retarder, gas generators for automobile safety air bags,  common rail fuel injection technology (with maximum injection pressure  of more than 2,000 pa), variable geometry turbocharging (VGT), variable  nozzle turbocharging (VNT), engine emission control devices meeting  China’s Phase V pollutant emission standards, intelligent torque  management (ITM) systems and coupler assembly, steer-by-wire systems, ,  diesel particulate trap devices, special-purpose axles for lowfloor  large buses, energy-absorbing steering system, variable frequency  air-conditioning system for large and medium buses, special rubber  automobile accessories, and key parts and components of the above parts  and components

208.       Manufacturing  and research and development of automobile electronic devices:  electronic control systems and key parts and components of engine and  chassis, vehicle electronic technologies (automobile information system  and navigation system), automobile electronic bus network technologies,  input (sensor and sampling system) and output (actuator) components of  electronic control system, electronic controllers for electric power  steering system, embedded electronic integrated systems,  electronically-controlled air springs, electronically-controlled  suspension system, electronic valve system devices, electronic  combination instrument, ABS/TCS/ESP systems, Brake-By-Wire (BBW) system,  gearbox transmission control unit (TCU), tire pressure monitoring  system (TPMS), on-board diagnostics (OBD), engine anti-theft system,  automatic bump-shielded system, and testing systems for automobile and  motorcycle testing and maintenance

209.       Manufacturing of key parts and components of new energy automobiles: battery separators (thickness of 15-40 μm, porosity  of  40%-60%); battery management system, motor management system,  electronic control integration of electric vehicles; driving motors of  electric vehicles (peak power density ≥ 2.5 kW/kg, high-efficiency area:  65%, efficiency in working area ≥ 80%), vehicle DC/DC (input voltage of  100 V – 400 V), high-power electronic devices (IGBT, voltage class ≥  600 V, current ≥ 300 A); and plug-in hybrid electromechanical coupling drive systems; low-platinum catalyst for fuel cell,  composite membranes, membrane electrodes, humidifier control valves,  air compressors, hydrogen circulating pumps, and 70 MPa hydrogen  cylinders.

(XX) Manufacturing of Railways, Ships, Aircrafts and Other Transportation Equipment

210.       Manufacturing  of engine emission control devices for motorcycles with large engine  capacity (engine capacity > 250 ml) that meet China’s Phase IV  pollution discharge standards for motorcycles

211.       Design, manufacturing and maintenance of civil aircrafts: aircrafts for trunk lines, regional aircrafts and utility aircrafts

212.       Manufacturing and maintenance of civil aircraft parts and components

213.       Design and manufacturing of civil helicopters

214.       Manufacturing of civil helicopter parts and components

215.       Manufacturing  of ground-effect and water-effect aircrafts as well as design and  manufacturing of unmanned aircrafts and aerostats

216.       Design, manufacturing and maintenance of aircraft engines, engine parts and components and aircraft auxiliary power systems

217.       Design and manufacturing of airborne equipment for civil aviation

218.       Manufacturing  of aviation ground equipment: civil airport facilities, civil airport  operation guarantee facilities, ground facilities for flight tests,  flight simulation and training equipment, aviation test and measurement  equipment, equipment for aviation ground tests, integrated test  equipment for airborne equipment, special equipment for aeronautical  manufacturing, special equipment for trail manufacturing of aeronautic  materials, civil aircraft ground reception and application equipment,  carrier rocket ground testing equipment, and equipment for carrier  rocket mechanics and environmental experiments

219.       Design and manufacturing of civil satellites, and manufacturing of civil satellite payloads

220.       Manufacturing of parts and components of civil satellites

221.       Manufacturing of inspection equipment for satellite-borne products

222.       Design of cruise ship and deepwater (3,000 meters or more) marine engineering equipment

223.       Design of low- and medium-speed diesel engines of vessels and their parts and components

224.       Design of cabin machinery of vessels

225.       Design of vessel communication and navigation equipment

226.       Design of yachts

(XXI) Electric Machinery and Equipment Manufacturing

227.       Manufacturing  of key auxiliary equipment used for one million-kilowatt  ultra-supercritical thermal power units: safety valves and control  valves

228.       Manufacturing of denitration equipment of sintering machines in steel industry

229.       Design and manufacturing of seals of thermal power equipment

230.       Manufacturing of large castings and forgings for coal-fired power station and hydropower station equipment

231.       Manufacturing of key auxiliary equipment for hydropower generating units

232.       Manufacturing of power transmission and transformation equipment

233.       Manufacturing  of complete sets of equipment or key equipment for new energy power  generation: equipment for photovoltaic power generation, geothermal  power generation, tidal power generation, wave  power generation, garbage power generation, biogas power generation,  and wind power generation with a capacity of 2.5 megawatts or more

234.       Manufacturing of Stirling generator sets

235.       Development and manufacturing of linear motors, planar motors, and their drive systems

236.       Manufacturing  of high-tech green batteries: nickel-metal hydride (Ni-MH) batteries,  nickel-zinc batteries, silver-zinc batteries, lithium-ion batteries,  solar batteries, fuel batteries, etc. (excluding energy type of new  energy vehicle batteries)

237.       Manufacturing  of refrigeration compressors for air conditioning with motor adopting  DC speed control technology, refrigeration compressors for air  conditioning with motor adopting CO2 natural refrigerants,  and refrigeration equipment for air conditioning applying renewable  energy (air source, water source or ground source)

238.       Manufacturing of solar air conditioning and heating systems and solar drying devices

239.       Manufacturing of biomass drying and pyrolysis systems and biomass gasification devices

240.       Manufacturing of alternating current (AC) variable frequency variable voltage (VFVV) drive devices

(XXII) Manufacturing of Computers, Communication and Other Electronic Equipment

241.       Manufacturing of HD digital cameras and digital sound playing equipment

242.       Manufacturing  of TFT-LCD, PDP, OLED and other panel displays and materials of  displays (excluding TFT-LCD glass substrate for the 6th generation and below)

243.       Manufacturing  of key parts for large-screen color projection displays, including but  not limited to optical engines, light sources, projection screens,  high-resolution projection tubes, and micro-display projection modules

244.       Manufacturing  of digital audio and video coding and decoding equipment; equipment for  digital broadcasting and television studios; equipment for digital  cable television systems; digital audio broadcasting transmission  equipment; digital television up and down converters; digital  television terrestrial broadcasting single frequency network (SFN)  equipment; and equipment for satellite digital TV uplink stations

245.       Design  of integrated circuits; manufacturing of large-scale digital integrated  circuits with a line width of 28 manometers or less; manufacturing of  analog or digital-analog integrated circuits with a line width of 0.11  micron or less; manufacturing of MEMS and compound semiconductor  integrated circuits; and BGA, PGA, FPGA, CSP, MCM and other advanced  encapsulation and testing

246.       Manufacturing  of large- and medium-sized electronic computers, high performance  computers with a computing capacity of 10,000 trillion calculations per  second, portable minicomputers, large analog simulation systems, and  large industrial control computers and controllers

247.       Manufacturing of computer digital signal processing system and boards

248.       Manufacturing of graphic and image recognition and processing system

249.       Development and manufacturing of high-capacity optical and disk drivers and their components

250.       Manufacturing of high-speed memory system and intelligent memory device with a capacity of 100 TB or more

251.       Manufacturing  of computer-aided design (three-dimensional CAD) systems, electronic  design automation (EDA), computer-aided testing (CAT), computer-aided  manufacturing (CAM), computer-aided engineering (CAE) systems, and other  computer application systems

252.       Development and production of software products

253.       Development  and manufacturing of materials exclusively for electronic purposes  (excluding development and manufacturing of optical fiber performs)

254.       Manufacturing of equipment, testing instruments, tools and molds exclusively for electronic purposes

255.       Manufacturing of new electronic parts and components: chip components, sensitive components and sensors, frequency control and

selection  components, hybrid integrated circuits, power electronic devices,  optoelectronic devices, new electromechanical components, polymer solid  capacitors, super-capacitors, passive integrated components,  high-density interconnect (HDI) laminated boards, multi-layer flex  printed circuit (FPC) boards, rigid-flex printed circuit (R-FPC) boards,  and packaging boards

256.       Manufacturing of touch control system (touch control screens, touch components, etc.)

257.       Research, development and manufacturing of virtual reality (VR) and augmented reality (AR) equipment

258.       Manufacturing  of high-brightness light-emitting diodes (LEDs) with luminous  efficiency of more than 140 lm/W, LED epitaxial wafers (blue light) with  luminous efficiency of more than 140 lm/W and white luminous tubes with  luminous efficiency of more than 140 lm/W and power of more than 200 mW

259.       Development and production of key parts of high-density digital disk drives

260.       Production of recordable disks

261.       Research, development and manufacturing of key parts and components of 3D printing equipment

262.       Manufacturing of equipment for satellite communication systems

263.       Manufacturing of optical communication measuring instruments and optical transceivers with a speed of 40 Gbps or more

264.       Manufacturing of ultra-wideband (UWB) communication equipment

265.       Manufacturing of equipment for wireless local area networks (including WAPI support) and wide area networks

266.  Manufacturing of time division multiplexing equipment (TDM) with rate  of 100 Gbps or more, dense wavelength division multiplexing equipment  (DWDM), broadband passive network equipment (including EPON, GPON,  WDM-PON, etc.), next-generation DSL chips and equipment, optical cross  connect (OXC) equipment, automatically switched optical network (ASON)  equipment, and transmission equipment for optical fiber communication at  more than 40 Gbps SDH

267.       Development  and manufacturing of IPv6-based next generation internet system  equipment, terminal equipment, testing equipment, software, and chips

268.       Development  and manufacturing of the fourth generation and subsequent mobile  communication cell phones, base stations, core network equipment, and  network testing equipment

269.       Development  and manufacturing of (bi-directional) high-end routers with an overall  processing capacity of more than 6.4 Tbps and network switches with a  switching capacity of more than 40 Tbps

270.       Manufacturing of equipment for air traffic control systems

271.       Development  and manufacturing of electronic teaching aiding equipment for  traditional Chinese medicines based on sound, light, electricity or  touch-controlled computer information technologies and human body model  with virtual pathology and physiology

(XXIII) Manufacturing of Instruments and Meters

272.       Manufacturing  of industrial process automatic control system and devices: fieldbus  control systems, large-scale programmable logic

controller (PLC), two-phase flow meters, solid flow meters, new-type sensors and field measuring meters

273.       Development  and manufacturing of large precision instruments and high resolution  microscope (with a resolution of less than 200 nm)

274.       Manufacturing of high-precision digital voltmeters and ammeters (with a span of seven and a half bits or more)

275.       Manufacturing of reactive power auto-compensation devices

276.       Manufacturing of new instruments and equipment for production safety

277.       Manufacturing of VXI bus automatic testing systems (meeting IEEE1155 international standards)

278.       Development  and manufacturing of coal mine underground monitoring and hazard  forecasting systems and coal safety testing and management systems

279.       Manufacturing of engineering surveying and geophysical observation equipment

280.       Manufacturing of environmental monitoring instruments

281.       Manufacturing  of instruments and equipment for hydrological data collection,  processing, and transmission and for flood control early warning

282.       Manufacturing of instruments and equipment for marine exploration monitoring

(XXIV) Comprehensive Utilization of Waste Resources

283.       Coal dressing and comprehensive utilization of coal ash (including desulfurized gypsum), coal gangue, etc.

284.       Production of completely biodegradable materials

285.       Recycling  and treatment of waste and used electrical and electronic products,  automobiles, electromechanical equipment, rubbers, metals, and batteries

IV. Production and Supply of Electric Power, Heating Power, Fuel Gas and Water

286.       Construction  and operation of ultra-supercritical unit power station with the  capacity of a single unit of 600,000-kilowatt or more

287.       Construction  and operation of back-pressure combined heat and power stations,  combined cooling, heating and power stations, and combined heat and  power stations with capacity of 300,000 kilowatt or more

288.       Construction  and operation of large air cooling unit power stations with the  capacity of a single unit of 600,000-kilowatt or more in water-deficient  areas

289.       Construction  and operation of integrated gasification combined cycle power  generation and other clean coal power generation projects

290.       Construction  and operation of power generating projects of a single unit of  300,000-kilowatt or more by using fluidized bed combustion bolters and  coal gangue, middings and coal slime, etc,

291.       Construction and operation of hydropower stations for the primary purpose of power generation

292.       Construction and operation of nuclear power stations

293.       Construction  and operation of new energy power stations (including but not limited  to solar energy, wind energy, geothermal energy, tidal energy, tidal  current energy, wave energy, and biomass energy)

294.       Construction and operation of power grid

295.       Seawater utilization (direct utilization of seawater or seawater desalination)

296.       Construction and operation of water supply plants

297.       Construction and operation of renewable water

298.       Construction and operation of sewage treatment plants

299.       Construction and operation of vehicle charging stations and battery replacement stations

300.       Construction and operation of hydrogen refueling stations

V. Transportation, Warehousing and Postal Service Industries

301.       Construction and operation of network of trunk railway lines

302.       Construction  and operation of intercity railway, urban (suburban) railway,  resource-oriented development railway, branch railway lines, and relater  bridges, tunnels, ferries and station facilities

303.       Comprehensive maintenance of infrastructures of high-speed railway lines and intercity railways

304.       Construction and operation of highways, independent bridges and tunnels

305.       Road freight companies

306.       Construction and operation of public wharf facilities in ports

307.       Construction and operation of civil airports

308.       Public air transportation companies

309.       General aviation companies for agriculture, forestry, and fishery

310.       International marine transportation companies

311.       International container multimodal transportation services

312.       Construction and operation of oil (gas) pipelines and oil (gas) depots

313.       Construction and operation of coal pipeline transportation facilities

314.       Construction  and operation of elevated three-dimensional automatic warehousing  facilities and integrated warehousing facilities related to packaging,  processing and distribution services

VI. Wholesale and Retail Industries

315.       Common  distribution of general commodities, low-temperature distribution of  live and fresh agricultural products and special drugs, as well as other  logistical services and relevant technological services

316.       Rural chain distribution

317.       Construction and operation of pallet and container unit sharing system

VII. Leasing and Commercial Service Industries

318.       International economic, science and technology, environmental protection, and logistical information consulting services

319.       Engaging  in system application management and maintenance, information  technology support management. Bank back-office services, financial  settlement, software development, off-shore call centers, data  processing and other information technology and business process  outsourcing services by contracting outsourced services

320.       Venture capital enterprises

321.       Intellectual property right services

322.       Household services

VIII. Scientific Research and Technical Services

323.       Bioengineering and biomedical engineering technologies and biomass energy development technology

324.       Isotope, radiation and laser technology

325.       Marine  development and marine energy exploitation technology, technology for  comprehensive utilization of marine chemical resources, development and  refinement or deep processing of related products, and marine medicine  and biochemical product development technology

326.       Ocean  monitoring technology (ocean tidal waves, weather and environment  monitoring) and submarine detection and oceanic resources exploration  and assessment technology

327.       Technologies  for high value-added utilization of seawater chemical resources,  including but not limited to production of salt and extraction and deep  processing of potassium, bromine, magnesium, lithium by comprehensively  utilizing desalinated dense seawater

328.       Offshore  oil pollution cleaning and ecological restoration technology and  relevant product development, technology for prevention and treatment of  seawater eutrophication, technology for prevention and treatment of  marine life explosive growth disaster, and coastal zone ecological  environment restoration technology

329.       Development of energy saving and environmental protection technologies and related services

330.       Development  and application of technologies for recycling and comprehensive  utilization of resources and for recycling of emissions and discharges  from enterprise production

331.       Environmental pollution treatment and monitoring technologies

332.       New  technologies for energy efficiency in chemical fiber production and  printing and dyeing processing and for the treatment of exhaust gas,  waste liquid and waste residue

333.       Desertification prevention and desert treatment technologies

334.       Comprehensive management technology for grassland-livestock balance

335.       Civil satellite application technology

336.       Research and development centers

337.       High and new technology, new product development and enterprise incubation centers

338.       Development and application of Internet of things technology

339.       Industrial design, architectural design, costume design and other creative industries

IX. Water Conservancy, Environmental, and Public Facility Management Industries

340.       Construction and operation of urban enclosed roads

341.       Construction and operation of urban subway, light railway and other track transport

342.       Construction  and operation of sewage and garbage treatment plants, hazardous waste  treatment and disposal plants (incineration plants and landfills), and  environmental pollution treatment and control facilities

343.       Construction and operation of urban parking facilities

X. Education

344.       Non-academic vocational training institutions

XI. Health and Social Services

345.       Service institutions for seniors, the disabled and children

346.       Nursing institutions for the aged

XII. Cultural, Sports and Entertainment Industries

347.       Operation of performance sites

348.       Operation of sports grounds and body-building, contest performance and sports training and intermediate services

 　　　

Special Management Measures for Foreign Investment Access

(Negative List for Foreign Investment Access)

Explanations

I. The Special Management Measures for Foreign Investment Access (Negative  List for Foreign Investment Access) lists the equity control, executive  requirements and other restrictive measures for foreign investment  access in a unified way. Restrictive measures with consistent proportion of domestic and foreign funds and those that are not part of the scope of access are not included in the Special Management Measures for Foreign Investment Access (Negative List for Foreign Investment Access).

II.  Foreign investors shall not engage in business activities as individual  industrial and commercial households, investors of individual  proprietorship enterprises and members of farmers' professional  cooperatives.

III.  Foreign investors shall not be engaged in prohibited items specified in  the Special Management Measures for Foreign Investment Access (Negative List for Foreign Investment Access);  engaged in restricted items with requirements for proportion of foreign  investment, and shall not establish foreign-invested partnership  enterprises.

IV.  If a domestic company, enterprise or natural person acquiring a  domestic company associated with it with its company lawfully  established or controlled outside China involves foreign investment  items and the establishment and change of enterprises, the current  provisions shall prevail.

V.  For the overlapping clauses between the Catalogue of Encouraged  Industries for Foreign Investment and the Special Management Measures  for Foreign Investment Access (Negative List for Foreign Investment Access), the policy of encouragement shall be enjoyed and meanwhile the relevant access regulations shall be followed.

VI.  If the Mainland and Hong Kong Closer Economic Partnership Arrangement  and its supplements and service trade agreements, the Mainland and Macao  Closer Economic Partnership Arrangement Special Administrative Zone and  its supplements and service trade agreements, the Cross-strait Economic  Cooperation Framework Agreement and its subsequent agreements, the free  trade zone agreements and investment agreements signed by and between  China and other relevant countries, international treaties to which  China is a party and Chinese laws and regulations provide otherwise, the  relevant provisions shall prevail.

VII.  If foreign service providers providing news and cultural services  (including Internet related news and cultural services) in the territory  of Chinese must fulfill the relevant approval and safety assessment as  well as executive requirements, then current relevant provisions shall  prevail.

Part I Catalogue of Restricted Industries for Foreign Investment

1.    Selection and cultivation of new varieties of crops and production of seeds  (with Chinese party as the controlling shareholder)

2.    Exploration  and exploitation of oil and natural gas (including coal-bed gas and  excluding oil shale, oil sand, shale gas and so on) (limited to  Sino-foreign equity or contractual joint ventures)

3.    Exploration and exploitation of special and rare kinds of coal (with Chinese party as the controlling shareholder)

4.    Exploration and exploitation of graphite

5.    Printing of publications (with Chinese party as the controlling shareholder)

6.    Smelting and separation of rare earth (limited to Sino-foreign equity or contractual joint ventures); smelting of tungsten

7.    manufacturing  of complete automobiles and special purpose motor vehicles: the  proportion of Chinese shares shall not be less than 50%. A foreign  investor may set up at most two joint ventures to manufacture complete  products of the same kind (including passenger vehicles and commercial  vehicles), but such limitation can be ignored if the foreign investor,  jointly with its Chinese joint venture partner, acquires other Chinese  automobile manufactures and establishes a joint venture to produce  complete pure electric vehicle products

8.    Repair, design and manufacturing of ships (including subsections) (with Chinese party as the controlling shareholder)

9.    Design,  manufacturing and maintenance of aircrafts for trunk lines and regional  aircrafts; design and manufacturing of helicopters 3 tons or more;  manufacturing of ground-effect and water-effect aircrafts; design and  manufacturing of unmanned aircrafts and aerostats (with Chinese party as  the controlling shareholder);

10.  Design, manufacturing and maintenance of utility aircrafts (limited to Sino-foreign equity or contractual joint ventures)

11.  Production of satellite television broadcasting ground receiving facilities and key parts

12.  Construction and operation of nuclear power stations (with Chinese party as the controlling shareholder)

13.  Construction and operation of power grid (with Chinese party as the controlling shareholder)

14.  Construction  and operation of pipeline networks for gas, heat, and water supply and  sewage in cities with a population of more than 500,000 (with Chinese  party as the controlling shareholder)

15.  Construction and operation of network of trunk railway lines (with Chinese party as the controlling shareholder)

16.  Railway passenger transport companies (with Chinese party as the controlling shareholder)

17.  Domestic  water transport companies (with Chinese party as the controlling  shareholder); international marine transportation companies (limited to  Sino-foreign equity or contractual joint ventures)

18.  Construction and operation of civil airports (with Chinese party as the relative controlling shareholder)

19.  Public  air transportation companies (with Chinese party as the controlling  shareholder and the proportion of investment by a foreign-owner  enterprise and its affiliated enterprises not exceeding 25%; the legal representative must have Chinese nationality)

20.  General  aviation companies (the legal representative must have Chinese  nationality; limited to Sino-foreign equity joint ventures in case of  general aviation companies for agriculture, forestry, and fishery; with  Chinese party as the controlling shareholder in case of other general  aviation companies)

21.  Telecommunication  companies: limited to services that WTO promises to open; value-added  telecommunication services (with the proportion of foreign investment  not exceeding 50%, except for e-commerce); basic telecommunication  services (with Chinese party as the controlling shareholder)

22.  Purchase and wholesale of rice, wheat and corn

23.  Vessel agencies (with Chinese party as the controlling shareholder)

24.  Construction  and operation of gas stations (in the case of the same foreign  investors selling product oil of different varieties and brands from  multiple suppliers through more than 30 chain gas stations, the Chinese  parties shall be the controlling shareholders)

25.  Banks  (the proportion of investment in capital in a Chinese-funded commercial  bank by a foreign financial institution and the affiliated party under  common control as promoter or strategic investor shall not exceed 20%,  while the proportion of investment in capital in a Chinese-funded  commercial bank by more than one foreign financial institution and the  affiliated party under common control as promoter or strategic investor  shall not exceed 25%; the foreign financial institutions investing in  China’s small or middle-sized financial institutions in rural areas must  be banking financial institutions; the foreign investors establishing  foreign bank branches, wholly foreign-funded banks and joint  Chinese-foreign banks, the sole or controlling shareholder must be  foreign commercial banks, while non-controlling shareholders may be  foreign financial institutions)

26.  Insurance companies (in the case of life insurance companies, the proportion of foreign investment shall not exceed 50%)

27.  Securities  companies (limited in establishment to underwriting and sponsoring of  A-shares, B-shares, government and corporate bonds, brokerage of  B-shares, brokerage and proprietary trading of government and corporate  bonds, qualified companies which have been established for two years or  more may apply for expansion of business scope; with Chinese party as  the controlling shareholder), and securities investment fund management  companies (with Chinese party as the controlling shareholder)

28.  Futures companies (with Chinese party as the controlling shareholder)

29.  Market  survey (limited to Sino-foreign equity or contractual joint ventures,  and radio and television ratings surveys shall be conducted by  enterprises with the Chinese party as the controlling shareholder)

30.  Surveying and mapping companies (with Chinese party as the controlling shareholder)

31.  Pre-school, ordinary high school and higher educational institutions (limited to Sino-foreign contractual educational institutions, with Chinese party as the leader )

32.  Medical institutions (limited to Sino-foreign equity or contractual joint ventures)

33.  Production of radio and television programs and movies (limited to contractual joint ventures)

34.  Construction and operation of movie theaters (with Chinese party as the controlling shareholder)

35.  Performance brokerage agencies (with Chinese party as the controlling shareholder)

*      “With  the Chinese party as the leader” refers to the principal or person  primarily in charge of administration shall have Chinese nationality,  and the number of Chinese members of the board of governors, the board  of director or joint administrative committee of a Sino-foreign  contractual educational institution shall be not less than 50%.

Part II Catalogue of Prohibited Industries for Foreign Investment

1.    Research  and development, breeding, and planting of China’s rare and special  varieties and production of relevant breeding material (including  quality genes in planting industry, animal husbandry, and aquaculture)

2.    Breeding  of genetically modified crops, livestock and poultry and aquatic  fingerlings and production of genetically modified seeds (seeding)

3.    Fishing in the sea area and inland waters under China’s jurisdiction

4.    Exploration and exploitation of tungsten, molybdenum, tin, stibium and fluorite

5.    Exploration, exploitation and ore dressing of rare earth

6.    Exploration, exploitation and ore dressing of radioactive minerals

7.    Application  of processing techniques such as steaming, stir-frying, roasting,  moxibustion, and calcination for making small pieces of ready-for-use  traditional Chinese medicines, and production of traditional Chinese  patent medicine of secret prescriptions

8.    Smelting and processing of radioactive minerals, and production of nuclear fuels

9.    Manufacturing of weapons and ammunitions

10.  Production of Xuan paper and Chinese ink ingot

11.  Air traffic control

12.  Postal companies; domestic express delivery of letters

13.  Wholesale and retail of tobacco, cigarette, redrying tobacco and other tobacco products

14.  Social survey

15.  Chinese legal affairs consulting (except to the providing of information relating to the influence of Chinese legal environment)

16.  Development and application of human stem cell and genetic diagnosis and treatment technologies

17.  Geodetic  surveying; marine charting; aerial photograph for surveying and mapping  purposes; ground mobile surveying; administrative boundary surveying  and mapping; compilation of topographic map, world administrative map,  national administrative map, administrative map at provincial level or  below, national school map, local school map, true three-dimensional map  and navigating digital map; local geological mapping; and survey for  mineral geology, physical geography, geochemistry, hydrogeology,  environmental geology, geological disasters, remote sensing geology and  so on.

18.  Development of wild animal and plant resources originated in and protected by China

19.  Compulsory education institutions

20.  News agencies (including but not limited to the news agency)

21.  Editing and publishing of books, newspapers and periodicals

22.  Editing, publishing and production of audio and video products and electronic publications

23.  All  radio stations, television stations, radio and television channels  (frequencies), radio and television transmission and coverage networks  (transmitting stations, relay stations, radio and television satellites,  satellite uplink stations, satellite receiving and transmitting  stations, microwave stations, monitoring stations, and cable radio and  television transmission and coverage networks), radio and television  video on demand services and installation of satellite television  broadcasting ground receiving facilities

24.  Radio and television program (including introduced business) production and operation companies

25.  Movie production companies, distribution companies, and theaters

26.  Internet  news information services, online publishing services, online audio and  video programs, business premises for internet-access services,  internet cultural business (excluding music), and online public  information publishing services

27.  Auction enterprises and cultural relic stores to engage in auction of cultural relics

28.  Humanities and social sciences research institutes

Note: The “above” and “below” mentioned in the Catalogue of Industries for Guiding Foreign Investment (Revision 2017) does not include the number; the “and above” or “and below” includes the number.

(This English version is only for reference. To learn more, please refer to the authoritative Chinese version.)